MP1350 stream punch3 parts

[techman3826]

I have a MP1350 with BK5010-SR5000-Streampunch3-Cover Interposer and the parts listed in the manual (see attached) are for the SR841.


Stream-Punch3.jpg


does anyone now what cables/hardware go with this?

thanks

[FRIDGEMAGNET]

Hi
The instructions are at the bottom of page 3 of the installation book.
You just need the mains cable and the data cable with the bracket attached to it - this replaces the existing SR5000 data cable.
If you use the data cable extension the Streampunch will not work.

[techman3826]

Hi
The instructions are at the bottom of page 3 of the installation book.
You just need the mains cable and the data cable with the bracket attached to it - this replaces the existing SR5000 data cable.
If you use the data cable extension the Stream punch will not work.

thanks for your input but this config was working in the demo room but then it was sent to the cust missing the accessories that I have attached on first post... I still cant seem to find a part number to order brackets listed in previous post. but did order harness only to find out that not one connector works.

have u actually connected this b4 because the serial stream punch connector thats in the manual is too big....and the BK5010 is using the bottom left connector on Fin main board. is the "mains cable" the serial that connects from the SR5000 to Stream3? or are u referring to the extended printer cable.

[iMind]

check this:

[techman3826]

check this:

thanks,
Sorry i prob didnt mention this but the 1350 is currently operating just fine with the BK5010+SR5000..
I really needed help with adding the stream punch 3 with post inserter to the SR5000.

[FRIDGEMAGNET]

Hi
Took a bit of finding but:
The hookup brackets are - VR34 0007 and VR34 0008
Im not sure which cable is which from the parts manual as there is no picture.
Hope this helps.

[iMind]

Great job Dave, That will make his day, NRG does not have streaming punch lll on sevice CD´s, only have acess to Plockmatic, great stuff. thats why I couldn´t find it, ricoh BK 5010 is not the same as Plockmatic BK 5010, stange

[FRIDGEMAGNET]

Streampunch is there under Martini (early one I think) but most of this was found on tessa and other sites.

[techman3826]

Thanks sooooo much....your awsome....
this is a testament to why this community tool is so important.

rich