Reco oficio Gastetner 3222 poor copy result

[Guest]

Picture 001.jpgPicture.jpg

plz help me.. my copier not working very good now.. small words our Micro copy prints are not good.. see the both pics ..one is orgnal and the other one is copy from orgnl and the copy result is very bad .. i dnt know where the problem is.. plz guid me how to solve this problem

[ruben]

Re: Reco oficio Gastetner 3222 poor copy result

Just like what you posted on you other username. Hire a qualified engineer.

We are not your tech support.

[slimslob]

Re: Reco oficio Gastetner 3222 poor copy result

Better yet, replace the dinosaur.

[shop14]

Re: Reco oficio Gastetner 3222 poor copy result

sorry.. who is hire?? i dnt know

[slimslob]

Re: Reco oficio Gastetner 3222 poor copy result

sorry.. who is hire?? i dnt know

ruben said a qualified engineer. That is someone trained on the equipment who works for an authorized service center and has available all the manuals, supplies and parts needed.

[Iowatech]

Re: Reco oficio Gastetner 3222 poor copy result

Sorry, I have to ask - the original in your picture is pretty bad. Why do you expect the copies of that to look good?
As far as I can tell the picture of the copy is exactly what copies should look like from that original.

[shop14]

Re: Reco oficio Gastetner 3222 poor copy result

yah original is not too good but i am just showing you sample .. but when i copy from good writing page then also this problem.. copy is not clean .. too bad words are not read clearly .. just small words not large

[Iowatech]

Re: Reco oficio Gastetner 3222 poor copy result

yah original is not too good but i am just showing you sample .. but when i copy from good writing page then also this problem.. copy is not clean .. too bad words are not read clearly .. just small words not large

Then try sharing a better example. It is a good way to get more accurate advice on a more timely basis.
We can't see your machine and what it is doing after all.
On a lighter note, there is a small chance that your toner is bad, or you don't have the machine's paper supply set up correctly. You should probably check that.