I have an LD 325 jamming in the exit tray. Paper comes up to the exit tray sensor and stops. How do you check sensors on this model? Better yet, any suggestions on what could be causing this to happen?
Lanier LD325 Jamming
Collapse
X
-
Re: Lanier LD325 Jamming
If my model translation table is correct (LD325 = MP2510), this manual should work quite nicely though:
Ricoh Copier [B205,B209,D007,D008] Aficio 3025, Aficio 3030, MP 2510, MP 3010 Parts & Service Manual - $14.77 : Just Manuals, The Internet's largest selection of manuals ~ Instant DownloadsLast edited by Iowatech; 08-09-2014, 02:19 AM.Comment
-
Re: Lanier LD325 Jamming
That being said, pull the fusing unit out of the machine and take the top cover off. Then tell us what you see around the hot roller drive gear. I suspect that fusing unit needs to be replaced, but I can't be sure until you tell me what's there. A picture would be even better.Comment
-
Re: Lanier LD325 Jamming
That's all well and good, but the manual is listed under Ricoh only.
If my model translation table is correct, this manual should work quite nicely:
Ricoh Copier [B205,B209,D007,D008] Aficio 3025, Aficio 3030, MP 2510, MP 3010 Parts & Service Manual - $14.77 : Just Manuals, The Internet's largest selection of manuals ~ Instant DownloadsComment
-
Re: Lanier LD325 Jamming
I am with Lanier dealer, but I keep forgetting that Paul only lists under the Ricoh models. We need to have a model cross reference available for those who are not with a Ricoh Family Group, RFG, dealer so they can know what to search for from Paul. I have a copy of Goose guide that has a second sheet that is a cross reference on my laptop at work. Maybe I can remember it Monday and extract it as a separate spreadsheet and post it. I knew there was a reason I should have brought it home for the weekend.
Katun Corporation - World Wide Equivalency Lists
It has worked pretty well for me. Sorry I didn't tell you about it sooner.Comment
-
-
Re: Lanier LD325 Jamming
Ricoh cross reference list: Support | Ricoh Support EuropeComment
Comment