Reseting Counter (Copy Reading Meter)

[Guest]

hi all. i was just wondering if you can reset the counter reading of the machine to zero, is this possible? thanks in advance

[sandmanmac]

Re: Reseting Counter (Copy Reading Meter)

hi all. i was just wondering if you can reset the counter reading of the machine to zero, is this possible? thanks in advance

Allow me to be the first (and there will be many that follow) to tell you that there are few questions that are asked around here that get us more worked up than a post asking for tips about how to commit fraud - and a 1st post at that!
I know, I know.... you'll come back with all kinds of reasons for wanting to do it as a 'service' to your customer or some B.S. That won't fly.

[slimslob]

Re: Reseting Counter (Copy Reading Meter)

As sandmanmac stated, to deliberately roll back the meter on any equipment is considered fraud almost everywhere. To do so and get caught could result in a major fine for your company, your boss, and even you. In some places it could even jail time.

[logrady2331]

Re: Reseting Counter (Copy Reading Meter)

Mr. Starecankill, There is a way to zero a meter. It's called BUY A NEW MACHINE and it will be at zero.

[Tonerbomb]

Re: Reseting Counter (Copy Reading Meter)

well there you go, right out of the gate you ask the one question that will bring the RATH of the Consortium upon you!!!!!!!!!!! you couldn't go to the newbie thread to introduce yourself or search the forums for that question..........the responses may seem harsh, but we don't support or endorse alteration of or resetting of total counters on machines!!!!!!!!!!!!! red card for you!!!!

[starecankill]

Re: Reseting Counter (Copy Reading Meter)

i was just curios,and also i didn't know that its illegal. im sorry for that.. but thanks for the quick reply all ...

[starecankill]

Re: Reseting Counter (Copy Reading Meter)

I'll be careful with my question next time. sorry again ...

[Francoi]

Re: Reseting Counter (Copy Reading Meter)

I'll be careful with my question next time. sorry again ...

i don't know

[anothertech]

Re: Reseting Counter (Copy Reading Meter)

After we tell him how to reset the meter, maybe we can provide him with the current Frimwar! Free of course.

[slimslob]

Re: Reseting Counter (Copy Reading Meter)

After we tell him how to reset the meter, maybe we can provide him with the current Frimwar! Free of course.

No, no, that should be formware. Will most likely want manuals for everything for free as well.

[sandmanmac]

Re: Reseting Counter (Copy Reading Meter)

i don't know

This is a very strange and confusing statement for a first post. .

But , if it's any consolation. A lot of the time...."I don't either"