Mp6001 df jams and feed noises

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • davydoodledo
    Technician
    • Jan 2010
    • 21
    #1

    Mp6001 df jams and feed noises

    Which one way gears have people been replacing to eliminate feed in jams?
    Tags: None
    • mikadonovan
      Senior Tech

      Site Contributor
      2,500+ Posts
      • May 2008
      • 2931
      #2
      Re: Mp6001 df jams and feed noises

      I don't know about one way bearing problems on this model, but if the transport rollers are not driving, try this.

      Jam J006, DF.jpg
      NEVER ASSUME ANYTHING

        Comment

        • davydoodledo
          Technician
          • Jan 2010
          • 21
          #3
          Re: Mp6001 df jams and feed noises

          Thanks. but all ready done that along with playing with belt tension

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 37494
              #4
              Re: Mp6001 df jams and feed noises

              Have you tried cleaning or replacing the ADF feed components? Give us some information as to the jams: jam code(s), what you have observed when testing the feed.

                Comment

                • techsass
                  Trusted Tech

                  Site Contributor
                  100+ Posts
                  • Dec 2010
                  • 248
                  #5
                  Re: Mp6001 df jams and feed noises

                  I've had a run lately on the 1-way that the feed belt rides on causing feed in jams. So far popping the E-clip and dousing some degreaser on it has taken care of the problem. I haven't had any noise, so it may not be what you're seeing.

                    Comment

                    Previous template Next
                    Working...