Ricoh MPC5000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GeorgeBest
    Senior Tech

    500+ Posts
    • Jul 2009
    • 520
    #1

    Ricoh MPC5000

    Hi,

    Troubles with ADF original detection.
    A4, A3 works fine when feeded in the ADF.
    But, feeding a A4r (landscape) machine gives an error and ask for a A5 js paper ?
    Cleaned the sensors, no effect.

    Is there an adjustment here ? Can't find it in sm

    Thanks in advance
    Tags: None
    • NeoMatrix
      Senior Tech.

      2,500+ Posts
      • Nov 2010
      • 3514
      #2
      Re: Ricoh MPC5000

      Sounds like SP 4303 = 1 (A5 detect mode is on for banking machines etc.)
      Inauguration to the "AI cancel-culture" fraternity 1997...
      •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

        Comment

        • GeorgeBest
          Senior Tech

          500+ Posts
          • Jul 2009
          • 520
          #3
          Re: Ricoh MPC5000

          Hi,
          SP4303 was fine . .
          changed The sensors on the ADF trap (3 x) !!

          no results !
          still the machine says that it needs a B5 jis format paper ?

          anyone a clue here . . . Thnx!

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 37375
              #4
              Re: Ricoh MPC5000

              If the sensors you put on were new, I would say the harness the goes to them. If the stop for the feed table is missing or broken, the table can be lifted high enough to pull the connector to the ADF PCB partially loose. You can use SP 6007 to check the sensors.

                Comment

                Previous template Next
                Working...