MP2550 will not print or scan

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyaction
    Senior Tech

    Site Contributor
    500+ Posts
    • Oct 2007
    • 991
    #1

    MP2550 will not print or scan

    I just picked this up from my wholesaler and took back to my office to test and will not print or scan.
    copier and doc server work fine and I was able to get into WIM to set up the address book for scanning but scans don't go anywhere and no error message and when I try to print it does nothing.
    i have an MP2851 right next to it and it prints and scans fine with the same settings.
    Am I correct to assume these don't use a print scan sd card like the older models had?
    Also I pulled out the interface board and reseated the dimm and hdd.
    Possibly something in sim not turned on?
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37491
      #2
      Re: MP2550 will not print or scan

      Printer Features and Scanner Features should show in User Tools. If they do not, then you have a major problem, as they are imbedded on the controller board. If they do, but you can not print or scan through the network port, check SP 5985-001. It should be set to 1. SP 5985-002 is for the USB port and should be set to 1 to enable. If you can print through the USB port but not the network port, you may have a bad controller board. The port controller chip on the controller board is not opening the necessary ports for print and scan.

        Comment

        • copyaction
          Senior Tech

          Site Contributor
          500+ Posts
          • Oct 2007
          • 991
          #3
          Re: MP2550 will not print or scan

          Yes they both show in user tools and the nic and usb are both set to "1"
          I will have to try the usb printing but I didn't have a cable to test it.
          Like I said I am able to log into the WIM so the network appears to be working in that respect.

            Comment

            • copyaction
              Senior Tech

              Site Contributor
              500+ Posts
              • Oct 2007
              • 991
              #4
              Re: MP2550 will not print or scan

              OK so USB print works just no network print or scan.

                Comment

                • 88hawkfan
                  Technician

                  50+ Posts
                  • Jun 2014
                  • 76
                  #5
                  Re: MP2550 will not print or scan

                  Check and see if "Access Control" is enabled. Had a color machine show the same symptoms and this was the problem. Access control is under the security settings when using the WIM.

                    Comment

                    • Moza
                      Service Manager

                      100+ Posts
                      • Feb 2009
                      • 232
                      #6
                      Re: MP2550 will not print or scan

                      I would reset Printer Features back to factory default and clear NCS settings in SP 5801 for starters

                        Comment

                        • copyaction
                          Senior Tech

                          Site Contributor
                          500+ Posts
                          • Oct 2007
                          • 991
                          #7
                          Re: MP2550 will not print or scan

                          Thanks 88hawkfan, that was it.

                            Comment

                            Previous template Next
                            Working...