If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
SC361: Magenta TD sensor (Vt high) error . Symptom
- The Vt value of the black, magenta, cyan, or yellow TD sensor exceeds the specified value (default: 4.7V) with SP3020-002 for twenty counts.
- The [Vt - Vtref] value of the black, magenta, cyan, or yellow TD sensor exceeds the specified value (default: 5.0V) with SP3020-001. Possible Cause
1. Magenta TD sensor disconnected
2. Harness between TD sensor and PCU defective
3. Defective TD sensor. Troubleshooting Procedures
1. Check the black, magenta, cyan, or yellow TD sensor connector and harness between the TD sensor and PCU for damage.
2. Check the drawer connector.
3. Replace the defective PCU.
Comment