If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Contamination from bad toner. Replace the development unit with new developer. Clean out all toner in the PCU housing and the toner supply tray and put in genuine Ricoh toner.
While it would be kind of messy to replace a development unit with developer, slimslob is right otherwise. It is really important that you clean out all the old toner from the PCU before you put the new developer material in the development unit. That includes the toner in the drum unit's toner recycling auger.
Comment