Ricoh 1022 Cassette wheel only shows metric?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Mopar Freak
    Technician

    50+ Posts
    • Apr 2008
    • 55
    #1

    Ricoh 1022 Cassette wheel only shows metric?

    Ok, we have swapped some boards around, but the cassette wheels will only diplay A and B sizes. I can't seem to find anything in user tools or system settings to return it to inches. Two different SBCU boards were tried with the same result. Any ideas? Am I just missing something? Thanks ahead of time.
    Tags: 1022, 513, business, cassette, identical, metric, off, ricoh, sbcu, shows, system settings, wheel, wheels
    • iMind
      Vacuum Cleaning Expert

      1,000+ Posts
      • Mar 2008
      • 1116
      #2
      Originally posted by Mopar Freak
      Ok, we have swapped some boards around, but the cassette wheels will only diplay A and B sizes. I can't seem to find anything in user tools or system settings to return it to inches. Two different SBCU boards were tried with the same result. Any ideas? Am I just missing something? Thanks ahead of time.
      Hi Try this
      mm/inch Selection
      Selects whether mm or inches are used in the display.
      Note: After selecting the number, you must turn the main power switch off and on.
      Europe/Asia model: [0 = mm / 1 = inch]
      American model: [0 = mm / 1 = inch]
      sigpicWe can all Win, but at the end we all loose. Save the greyhound

        Comment

        • Mopar Freak
          Technician

          50+ Posts
          • Apr 2008
          • 55
          #3
          SP mode 5024 was set to 1. after restart same thing. display shows B5 for 81/2 x 11 portrait.

            Comment

            • cobiray
              Passing Duplication Xpert

              1,000+ Posts
              • Mar 2008
              • 1199
              #4
              I would recommend flashing the firmware. I've had some strange things happen when swapping boards between machines that don't have the identical firmware versions and accessories.
              the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
              Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
              Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

                Comment

                • Jomama46
                  Field Supervisor

                  Site Contributor
                  2,500+ Posts
                  • Apr 2008
                  • 2900
                  #5
                  change SP5131 to 1
                  sigpic
                  You never realize how cheap a professional is until after you let an amateur do it.
                  A+; Network +; PDI+

                    Comment

                    • iMind
                      Vacuum Cleaning Expert

                      1,000+ Posts
                      • Mar 2008
                      • 1116
                      #6
                      Originally posted by Jomama46
                      change SP5131 to 1
                      sigpicWe can all Win, but at the end we all loose. Save the greyhound

                        Comment

                        • DRichard
                          Trusted Tech

                          250+ Posts
                          • May 2008
                          • 482
                          #7
                          PWB Switches?

                          I seem to remember getting new boards from Ricoh that on a couple of occasions, had the mini switches (those tiny banks of bit-switches) set for use in Europe. This info was not in the literature and the only way we confirmed the correct settings was to compare the new board with one from a functional machine.
                          "Enjoy every sandwich."

                          -- Warren Zevon

                            Comment

                            • Mopar Freak
                              Technician

                              50+ Posts
                              • Apr 2008
                              • 55
                              #8
                              The Service Mangler strikes again! The 5131 was at 0. What I don't get is why the 0? I believe all the boards/copiers that were swapped worked correctly before being installed? I guess something caused one to go back to default?

                                Comment

                                • iMind
                                  Vacuum Cleaning Expert

                                  1,000+ Posts
                                  • Mar 2008
                                  • 1116
                                  #9
                                  Thanks for the feedback
                                  sigpicWe can all Win, but at the end we all loose. Save the greyhound

                                    Comment

                                    • Jomama46
                                      Field Supervisor

                                      Site Contributor
                                      2,500+ Posts
                                      • Apr 2008
                                      • 2900
                                      #10
                                      Glad you got it going.
                                      Did someone clear the memory? This would reset that bit to 0.
                                      sigpic
                                      You never realize how cheap a professional is until after you let an amateur do it.
                                      A+; Network +; PDI+

                                        Comment

                                        • Lagonda
                                          Service Manager

                                          Site Contributor
                                          1,000+ Posts
                                          • Aug 2008
                                          • 1649
                                          #11
                                          Of course you could join the rest of the world and go metric!

                                          Life would be so much easier if Microsoft was a european company and wrote all its software with metric as the default setting!
                                          At least 50% of IT is a solution looking for a problem.

                                            Comment

                                            Previous template Next
                                            Working...