MP C4500 Op panel dark...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Copyman2000
    Junior Member
    • Apr 2015
    • 6
    #1

    MP C4500 Op panel dark...

    OK so I swapped out the op panel with a known good one and it's still dark.

    Fuses on the power supply are good...

    Looking for any ideas???
    Tags: None
    • francisco
      Trusted Tech
      100+ Posts
      • Nov 2009
      • 168
      #2
      Re: MP C4500 Op panel dark...

      Originally posted by Copyman2000
      OK so I swapped out the op panel with a known good one and it's still dark.

      Fuses on the power supply are good...

      Looking for any ideas???
      change laser motor and bicu

        Comment

        • mikadonovan
          Senior Tech
          Site Contributor
          2,500+ Posts
          • May 2008
          • 2933
          #3
          Re: MP C4500 Op panel dark...

          Shine a flashlight into the LCD to see the sc code. If it is the polygon mirror motor, it must be replaced with the BICU at the same time, or it will happen again.
          NEVER ASSUME ANYTHING

            Comment

            • ptrflrs
              Glorified Parts Swapper
              100+ Posts
              • Dec 2010
              • 192
              #4
              Re: MP C4500 Op panel dark...

              Originally posted by mikadonovan
              Shine a flashlight into the LCD to see the sc code. If it is the polygon mirror motor, it must be replaced with the BICU at the same time, or it will happen again.
              is that the dreaded sc202?
              jesus loves you! (everyone else thinks you're an assh*le)
              street cred: CompTIA A+ & Network+ Certified; Konica Minolta Gold Seal x2,
              Konica Minolta Outward ASSociate, Ricoh, Sharp, Lexmark trained

                Comment

                • redneckstylin
                  Trusted Tech
                  100+ Posts
                  • Sep 2011
                  • 173
                  #5
                  Re: MP C4500 Op panel dark...

                  log into wim via ip addy of machine sc code will be on main screen

                    Comment

                    Previous template Next
                    Working...