R-3035

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tcypy1961
    Senior Tech

    500+ Posts
    • Feb 2009
    • 773

    #1

    R-3035

    when printing out logging info on SP print out the plotter info lists #14 & #67 with out telling area for misfeeds; could any one provide please and as to why the area is blank;
    Thanks!!!
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37491

    #2
    Re: R-3035

    Description of jam locations are listed in SP 7504. If the description is blank, you may need to update firmware. In the service manual, J14 is listed as duplex exit sensor 3. J67 is not listed but J66 is duplex exit sensor 1 so 67 could also exit sensor 3.

    As to why it is blank, Ricoh.

    Comment

    Working...