Ricoh Aficio MP8001

[Reed]

When using the ADF it slightly rips the leading edge of the paper where it passes between the ADF Feed belt and the separation roller. I have replaced the Feed Belt, Separation roller, Feed belt pulley, lubricated the ADF feed assembly. These have helped a little but it still rips the lead edge. Thanks in advance..

[allan]

Re: Ricoh Aficio MP8001

Does any thing seem to be bent?

[Reed]

Re: Ricoh Aficio MP8001

Everything appears to look good. The customer has 7502 in another room and I have even swapped out feed assemblies. The machine still puts a slight tear on the lead edge. Which makes me think it has to do with the lower frame unit. but just not sure

[mbolduc]

Re: Ricoh Aficio MP8001

Have you tried the torque limiter.....the white hub that the separation roller attaches too?

[Reed]

Re: Ricoh Aficio MP8001

I replaced it about 6 months ago. I wouldn't have thought it would be bad. But they are a title company so they scan A LOT! I'll try replacing it again.

[MIKON]

Re: Ricoh Aficio MP8001

Check the scan housing P/N D4123111.I have seen the rear anchor point crack .