U1-2134 Samsung 8040

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JLSam
    Senior Tech

    500+ Posts
    • Jun 2015
    • 605
    #1

    [Error Code] U1-2134 Samsung 8040

    Afternoon. Quick question.

    I came to a service call and noticed a history of fuser errors. I just wanted to see if the thermistors are dirty and I noticed they are not touching the heating element. Now on my experience with Brother, Sharp, canon, and HP. They always touch the heating element. Is this normal?

    Take a look at the following history, a picture.





    And



    So, this is my first Samsung Fuser disassembly so I'm not familiar with the engineering. Any advice would be greatly appreciated.[emoji106]

    Sent from my ONEPLUS A3000 using Tapatalk
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: U1-2134 Samsung 8040

      There are two kinds of thermistors. Kyocera uses some non-contacting thermistors. The rest are contacting thermistors.

      thermistor1.jpgthermistor2.jpg

      These are non-contacting thermistors

      thermistor3.jpg

      This is a contacting thermistor. Yours must make contact to work properly. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...