X4300 showing image overwrite in progress after switching on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wilbert.c
    Technician
    • Apr 2014
    • 24
    #1

    [Dead] X4300 showing image overwrite in progress after switching on

    Please find the attached image , machine showing image overwrite in progress and it does not change. Changed the HDD and uploaded hdd file but still no change. Any solution please.
    Attached Files
    Tags: change, hdd, image, progress, showing
    • rrrohan
      Service Manager
      Site Contributor
      1,000+ Posts
      • Sep 2011
      • 1968
      #2
      Re: X4300 showing image overwrite in progress after switching on

      so recovery firmware loaded ok? did u get a chance to load regular firmware or is this what your stuck with?

      Ive had to replace about 20 samsung HDDs and ive never seen this message.

      was it a 320GB drive?

        Comment

        • wilbert.c
          Technician
          • Apr 2014
          • 24
          #3
          Re: X4300 showing image overwrite in progress after switching on

          Originally posted by rrrohan
          so recovery firmware loaded ok? did u get a chance to load regular firmware or is this what your stuck with?

          Ive had to replace about 20 samsung HDDs and ive never seen this message.

          was it a 320GB drive?

          Thanks for reply. i could not do upload regular firmware because of that problem. Both hdd are 320gig.

            Comment

            • rrrohan
              Service Manager
              Site Contributor
              1,000+ Posts
              • Sep 2011
              • 1968
              #4
              Re: X4300 showing image overwrite in progress after switching on

              Originally posted by wilbert.c
              Thanks for reply. i could not do upload regular firmware because of that problem. Both hdd are 320gig.
              are the recovery files good? have you used them in past.

              i use X4xx0_series_EV11.01.12.01_FS14.03.06.21.13.tar.gz

                Comment

                • wilbert.c
                  Technician
                  • Apr 2014
                  • 24
                  #5
                  Re: X4300 showing image overwrite in progress after switching on

                  Originally posted by rrrohan
                  are the recovery files good? have you used them in past.

                  i use X4xx0_series_EV11.01.12.01_FS14.03.06.21.13.tar.gz
                  I used this X4xx0_series_EV11.01.12.00_FS14.03.06.19.13.tar.gz ,can you send the link to download the one you mentioned to wchoto@gmail.com

                  Is there recovery firmware for the main board ?
                  Last edited by wilbert.c; 09-16-2021, 02:43 PM.

                    Comment

                    • Thaum
                      Junior Member
                      • Aug 2022
                      • 1
                      #6
                      Re: X4300 showing image overwrite in progress after switching on

                      Originally posted by wilbert.c
                      I used this X4xx0_series_EV11.01.12.00_FS14.03.06.19.13.tar.gz ,can you send the link to download the one you mentioned to wchoto@gmail.com

                      Is there recovery firmware for the main board ?


                      Ditto on the above. Send the link to thaum1@gmail.com. I tried downloading it off the HP site but I keep getting an error on it and it tells me the file is corrupted.

                        Comment

                        Previous template Next
                        Working...