hello everyone
attended this machine because it's blurring bar codes/QR codes and BOLD type, stripped it, dismantled and cleaned the laser unit, dismantled and cleaned the ITB asssembly, put it all back together and while there was quite an improvement, it's still blurring barcodes as per the attached
CLX6260.pdf
machine has only done 24k, the client is using aftermarket toner, so i fitted another which made no difference - an OEM is on the way to them, however i suspect it will not correct the issue
anyone got any ideas? are charge, bias, laser diode outputs adjustable?
thanks in advance
attended this machine because it's blurring bar codes/QR codes and BOLD type, stripped it, dismantled and cleaned the laser unit, dismantled and cleaned the ITB asssembly, put it all back together and while there was quite an improvement, it's still blurring barcodes as per the attached
CLX6260.pdf
machine has only done 24k, the client is using aftermarket toner, so i fitted another which made no difference - an OEM is on the way to them, however i suspect it will not correct the issue
anyone got any ideas? are charge, bias, laser diode outputs adjustable?
thanks in advance