clx 3280

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Norvenmunkey
    Technician
    • Jun 2021
    • 23

    #1

    [Misc] clx 3280

    hi ya . have a clx 3280 that keeps sticking on logo screen. have done firmware and machine recovery. machine has had new hdd.
  • GIUBOSS
    Service Manager

    Site Contributor
    1,000+ Posts
    • Jul 2013
    • 1385

    #2
    Re: clx 3280

    Operator panel probably faulty

    Comment

    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22798

      #3
      Re: clx 3280

      Originally posted by Norvenmunkey
      hi ya . have a clx 3280 that keeps sticking on logo screen. have done firmware and machine recovery. machine has had new hdd.
      Could you write to HDD?
      Was firmware successful?
      Please give install steps. For all items replaced and any messages received.

      Sent from my SM-G960U using Tapatalk

      Comment

      • Phil B.
        Field Supervisor

        10,000+ Posts
        • Jul 2016
        • 22798

        #4
        Re: clx 3280

        Originally posted by GIUBOSS
        Operator panel probably faulty
        Or cable not installed correctly.

        Sent from my SM-G960U using Tapatalk

        Comment

        • Crowfeather
          Printer firmware is !&$!

          100+ Posts
          • Mar 2021
          • 127

          #5
          Re: clx 3280

          Design fault in v11 firmware. Supposedly fixed by v13.

          Best to just revert to v10 or older. HP somehow made the firmware for this series worse than FutureSmart. If issue persists potential problem with Main Board or OPE. Supposedly, the HDD is only used for spooling.

          Comment

          Working...