SAMSUNG CLX3175FN - Ambient temperature Sensor Fault

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lebric
    • Jul 2025
    #1

    SAMSUNG CLX3175FN - Ambient temperature Sensor Fault

    Tried to powercycle and waited about 20 min uplugged still nothing.
    My sensor might be bad is there someone who knows Samsung part number or any other magic trick and tell me where that sensor is located , please, thank you.
    Tags: ambient, bad, black, clx3175fn, cover, covers, door, fault, front, harness, laser, lef, left, number, part, part number, release, samsung, sensor, side, temperature, time, wide
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008
      #2
      No magic required this time.

      When you removed the left side cover it's usually required to detach the right side of the front door hinge. When you do this it tugs at the wiring to the environmental sensor which is located (you guessed it) in the front door. You'll notice the two squarish black plastic levers attached to the bottom of the front door that operate the laser shutter. Between them is a 1" wide shield that covers the wiring harness to the front door. Release the right side hinge, swing the door aside to detach the shield, secure the connector, and re-assemble the front door.

      I've done this to myself. It's lessons like this that you remember forever. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • lebric
          #3
          PROBLEM FIXED !!! Thanks a lot Blackcat for your tremendous and precious help !!!!!!!!!!!!!!!!!!!!

          from a junior in printers

            Comment

            Previous template Next
            Working...