I've just replaced this roller at a customer's site and can't find out how to reset it - I thought this should be easy, since it's a user-replaceable part, but I can't find it.
Any hints? Thanks!
Any hints? Thanks!
-
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation! -
Resets
I think this is what you're looking for:If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Well, I had thought of that, but the "Check others" only shows the remaining toners and the remaining life for the transfer belt - nothing there about the feed roller.' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
-
Re: Samsung CLP-660ND - Reset Pickup Roller
1) Tech Mode
Method to enter1. After turn on the system power, check the Ready message on the LCD.2. To enter the Tech Mode, Press the key in the order.Menu Back Left arrow Right arrow OK Stop
Menu Move to the top menuLeft Arrow Move test itemOK Start testing or select Sub-itemRight arrow Move test itemBack Move upper menuStop Stop testing
Data Set Counter Reset Fuser You can reset the Fuser Count.Pickup Tray1 You can reset the Roller-Count of each tray.Roller Tray2Comment
Comment