samsung scx 6555

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tomcatt
    Technician

    50+ Posts
    • Jul 2010
    • 92
    #1

    [Misc] samsung scx 6555

    one more weird problem on a scx 6555

    After pressing the start button the copier will scan image , do nothing and then go back to ready to copy. Image is held in log but no paper is output. The next copy jobs are then scanned but not printed until the machine is shut off then on and then will seem to work properly. My first idea is to replace hard drive. Looking for suggestions...
    Tags: copier, image, paper, replace, samsung, scan, service manual, work
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23009
      #2
      Re: samsung scx 6555

      HDD is a good possibility. DIMM memory also a possibility. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: samsung scx 6555

          This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            • pacman
              I can turn a screw...

              250+ Posts
              • Apr 2009
              • 318
              #4
              Re: samsung scx 6555

              Funny, I've had the same issue with a fax doing almost the same thing. Customer gets faxes, says printing, goes to pending. and nothing comes out.

              Soooooo, with that said, here's what I heard straight from our regional service manager:

              Reboot
              NVRAM initialize
              Fax NVRAM initialize
              Memory Clear
              HDD Format

              If that doesn't work, HDD replacement.

                Comment

                Previous template Next
                Working...