CLP 315 Black spots on the back page

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • geotzia
    #1

    CLP 315 Black spots on the back page

    Hello maybe you can help me with my laser printer Samsung CLP 315 ,makes at the back of the page black spots (black-brown) seem like toner,and if you scratch them you can remove them... I just open the machine and clean the drum the cartridge and i think everything with vacuum cleaner- but the problem is still there so if i print both sides i have the spots at both sides too.....
    Thanks in advance
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: CLP 315 Black spots on the back page

      Since the color of the toner you're seeing is brown, most likely it's a primary transfer belt cleaning problem.

      It could be something as simple as an address label stuck to the primary belt, or as catastrophic as a ripped belt. Whatever you discover, you'll probably need to replace the primary transfer belt assy, that only costs a little more than the whole printer when you bought it. =^..^=
      Last edited by blackcat4866; 02-03-2014, 04:12 PM.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: CLP 315 Black spots on the back page

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


          http://www.justmanuals.com



          Paul@justmanuals.com

            Comment

            Previous template Next
            Working...