I've got an scx-5935 jamming in the dockfeed. It skews and then hits on the backside right before the out put tray. If i push down on the back left hand side of the adf it feeds just fine. I don't see a way to make an adjustment to lower it.. and ideas??
-
-
Re: scx 5935
Perchance ... has the left hinge post blown out, and the spring poking out the bottom of the hinge post? When you lower the DF, does the back corner pop up?
Left hinge: JC97-03038A
Right hinge: JC97-02779A
This is really common on the small Sharps and Brothers. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: scx 5935
I agree replace the hindge.Comment
Comment