SCX 5935 with door open message

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Franthony
    • Jun 2025

    #1

    SCX 5935 with door open message

    Hello fellow toner techs! My first post on your sight. We are a sub dealer thru Neworld on Samsung and sold a ton of the 6320 and 6330's. This is my first visit to this model. The display says open door, and the front switch sounds good although i didn't get to it to meter it. Has anyone seen this? Thanks, I will browse your site to see what I can contribute!
  • ZOOTECH
    Senior member of CRS

    Site Contributor
    2,500+ Posts
    • Jul 2007
    • 3375

    #2
    Re: SCX 5935 with door open message

    Originally posted by Franthony
    Hello fellow toner techs! My first post on your sight. We are a sub dealer thru Neworld on Samsung and sold a ton of the 6320 and 6330's. This is my first visit to this model. The display says open door, and the front switch sounds good although i didn't get to it to meter it. Has anyone seen this? Thanks, I will browse your site to see what I can contribute!
    It might be the rear door covering the fuser.
    "You can't trust your eyes, if your mind is out of focus" --

    Comment

    • copytechman
      Senior Tech

      Site Contributor
      500+ Posts
      • Nov 2008
      • 929

      #3
      Re: SCX 5935 with door open message

      Or the HV board on the bottom of the machine.

      Regards!

      A.

      Comment

      • Franthony

        #4
        Re: SCX 5935 with door open message

        Originally posted by copytechman
        Or the HV board on the bottom of the machine.

        Regards!

        A.
        Thanks for the replies. I am going to check that pcb today and look forward to contributing here as well.

        Comment

        Working...