ar286 low toner shown

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jinjangu
    Technician
    • Jul 2008
    • 39

    #1

    ar286 low toner shown

    i have a ar286 m/c keep indicating low toner. the toner is full inside the hopper. the print out density is good too. i wonder what setting can i do to fix it?
  • deep
    Trusted Tech

    100+ Posts
    • Jun 2008
    • 208

    #2
    If you refilled the toner cartridge, then you have to replaced the toner chip as well.
    Kenny

    Comment

    • paul bristol uk
      Technician

      50+ Posts
      • Nov 2005
      • 51

      #3
      Its a Cougar no chip.

      Its going to be the foam roller in the toner box thats disintegrating. You need to replace that with the seals and bearings.

      Split the dev and toner box and empty the toner out(save it) and then look at the roller in the bottom and you will see what I mean.

      Comment

      • deep
        Trusted Tech

        100+ Posts
        • Jun 2008
        • 208

        #4
        Oops..... I thought I should have my reading-glasses changed.

        paul bristol uk is correct.
        Kenny

        Comment

        • jinjangu
          Technician
          • Jul 2008
          • 39

          #5
          thank you for you help

          Comment

          Working...