What parts do you usually replace in the FNX9 finishers?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CCS
    Trusted Tech

    Site Contributor
    250+ Posts
    • Feb 2008
    • 266

    #1

    What parts do you usually replace in the FNX9 finishers?

    I have some FNX9 finishers out there that the meters are getting up there, some intermittent jams.

    What parts would you replace to refurb the FNX9 ?

    I have not been inside one much yet but was going to order parts first before I tear one apart in the shop, thanks.
  • sharphead
    Trusted Tech

    250+ Posts
    • Aug 2009
    • 285

    #2
    Re: What parts do you usually replace in the FNX9 finishers?

    Take a look at a particularly tired one. The exit roller towards the front will hang lower than the one towards the back. This is caused by too much play in the mechanism that lifts the rollers. Look at the tech bulletin to resolve this.

    Apart from that I've had no problems and have a few pushing two million pages out.

    Comment

    • copytechonline
      Technician
      • Nov 2011
      • 40

      #3
      Re: What parts do you usually replace in the FNX9 finishers?

      Exit rollers X2 0CW4141P301//

      Inner Roller X2 0CW4141P007//

      Belt X2 0CW4141P372//

      Comment

      • CCS
        Trusted Tech

        Site Contributor
        250+ Posts
        • Feb 2008
        • 266

        #4
        Re: What parts do you usually replace in the FNX9 finishers?

        OK, Thanks alot.

        Comment

        • CCS
          Trusted Tech

          Site Contributor
          250+ Posts
          • Feb 2008
          • 266

          #5
          Re: What parts do you usually replace in the FNX9 finishers?

          Originally posted by sharphead
          Take a look at a particularly tired one. The exit roller towards the front will hang lower than the one towards the back. This is caused by too much play in the mechanism that lifts the rollers. Look at the tech bulletin to resolve this.

          Apart from that I've had no problems and have a few pushing two million pages out.
          I can't find or don't have access to this tech bulletin, could someone please post a link or pm me, thanks.

          Comment

          Working...