[CQ] Sharp MX-5111N Printing very light on one half of the page.

[jrtwilley]

I replaced the Primary Transfer Unit and the Secondary Transfer Unit on a Sharp MX-5111N. I also replaced the color developers. About halfway down the page (portrait), the print turns incredibly light. Not blank, but almost. I've checked the units installed for missed shipping foam or tape, and none. I checked the secondary unit for adequate pressure and that's also good. Need help on this, please. Thanks in advance.

Joel

[bigrobmass]

Re: Sharp MX-5111N Printing very light on one half of the page.

Im working on one right that was blank on one half of the page check your laser shudders and the solenoid that powers them, clean and check etc. It fixed my problem