Sharp AL-1655CS

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • magician
    #1

    Sharp AL-1655CS

    One of the two light tubes in the exposure unit snapped in half. Copier was printing a black line where the break was. I removed the broken tube and now it prints ok. Where can I get a replacement light tube before something happens to the other one?
    Terry
    Tags: al1655cs, breakdown, exposure, sharp, snapped, tubes
    • BODINE
      BODINE

      50+ Posts
      • Mar 2005
      • 74
      #2
      you can omly get it as a unit, no breakdown on parts, I have had a few of them break and the machines keep running fine

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22996
          #3
          Yep, Light Source 1 is an available as an assembly only, including lamps, mirrors, CCD, the whole shebang. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            Previous template Next
            Working...