I have a customer who is resurrecting an AR-M450U. They were moving it in the back of a pick-up and the top cover blew off the DF. I see in the parts manual that I can get all of the parts for this cover, but not the entire cover as a unit. Is it possible to get it? Thanks
-
-
Re: AR-M450U
Maybe somebody has one in the graveyard. The cover from the AR-EF3 will also work on an AR-EF1, just not quite as well. The AR-EF3's had some separation issues that came with the new design. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: AR-M450U
Those document feeders are a POS. Actually that whole family was. I looked in the ARM350, ARM355, and MXM350, their is no 901 for the entire unit. The top cover is in a different section as well. The MXM350 has a part number for the sep pad as a unit
I got 3 MXM450's left out there. They can't go away soon enough.Evil will always triumph because good is dumb.Comment
Comment