MX-5001N Copies with black edges on the page.

[thomfish]

Re: MX-5001N Copies with black edges on the page.

Do you have skew when copying from glass?

If yes you may need to change the balance between left and right heights of the scanner rail (two red screws at the front if I good remember)

[JLSam]

Re: MX-5001N Copies with black edges on the page.

Do you have skew when copying from glass?

If yes you may need to change the balance between left and right heights of the scanner rail (two red screws at the front if I good remember)

I thought we're not allowed to touch red screws... [emoji50]

Blue, and normal silver screws are fine.

Well, I learned something today.


Sent from my ONEPLUS A3000 using Tapatalk

[thomfish]

Re: MX-5001N Copies with black edges on the page.

I thought we're not allowed to touch red screws... [emoji50]

Blue, and normal silver screws are fine.

Well, I learned something today.


Sent from my ONEPLUS A3000 using Tapatalk

You might be right. There are 2 screws on the left side of the scanner unit and 2 at the front. I do not remember exactly if they are red. I had similar problem before and it was solved by changing height balance but in my case I had a skew on copies.