If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you have access to Sharpnet you can find it there. It is a very large file, 190MB. Sharp has a new tech website that also has the GDI Sharpdesk for this model but so far there have been issues when I have tried to download it. If you have the original setup discs it should have a version on them as this is the same as the ARM207 I believe. The download is not availible from SharpUSA website, sorry. Hope this is helpful. Good luck.
Hi there, thanks for your reply. I was asking this question for a third party and didn't have all the facts. It seems they have the driver but it won't install in WinXP but gives an error message - DLG_ERR. I gave up on Windows about 2 years ago so I'm a bit rusty on what might be the cause of this, but I'll keep looking. Once again, thanks for your advice.
Jen
Comment