Sharp AR M355 Scanner installation

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mlbcopiers
    Technician
    • Oct 2007
    • 34
    #1

    Sharp AR M355 Scanner installation

    I am installing the mx-nsx1 on a Sharp AR M355. I installed a few on the Sharp AR M277' a few years ago. I have already received the product key.

    Where do I imput the product key?

    Any pointers will be greatly appreciated.
    Thank you,
    Tags: installation, m355, pointers, scanner, sharp, sharp ar, stalling
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      I don't remember it all, but this should get you close enough:

      Custom Settings > Key Operator Programs > enter key operator code (default is 00000) > Product Key > Network Scanner Expansion Kit > Serial Number

      When you register the kit on the Sharp website be absolutely sure that the machine serial number is correct (read it right off the chromed tag on the back), and be sure that you save that product key somewhere in case it needs to be re-entered later.

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • bilyahn
          Service Manager

          1,000+ Posts
          • Dec 2006
          • 1470
          #3
          Blackcat4866 is absolutely correct about the serial number. An even better way to veriy the serial number is to do a sim printout using sim 22-6. This will show you the serial number that the machine thinks it is. Just to verify as the last time I went to Sharp tech school they mentioned that the serial number on the tag did not always match the serial number in the ROM. I personally haven't seen this happen but it is always a possibility. Or if the tag is damaged or lost. Good luck!

          Bil

            Comment

            Previous template Next
            Working...