Please i want to know how to check for copies made per day.thanks in advance.
-
-
Re: copies per day
There is no setting to give a daily meter count. You will have to take the previous days meter and subtract from the current meter to get a daily count. -
Re: copies per day
Each day go to the desired MFP. Print off the Counter Page. Subtract the values on yesterday's Counter Page. Now you know exactly how many pages were printed on any specific day. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Thanks.i will do just thatComment
-
Re: copies per day
You could set up email alerts to have the machine send you the meter and you can set it to send daily.Comment
-
How please?Comment
-
Re: copies per day
this is very easily done...look in the job log...I think that tells you all you would need to know...it does not, however, check for DNA...Comment
-
Re: copies per day
ah...setting up MICAS will also provide the information you seek...I'm pretty sure you have to be a dealer to get it all set-up...Comment
-
Re: copies per day
Enter the machines IP address in a browser on the same network as the machine.
On the menu on the left side, go to "Email Alert & Status"
Enter the admin password when prompted.
Enter your email address in one of the three "Email Status list" areas provided.
Select "Send by schedule 1" or "Send by schedule 2".
Scroll down and set Schedule 1 or Schedule 2 to daily. (The corresponding schedule that you selected in the prior step"
Scroll down and click on "Submit"
Note: The machine must be on a network and setup to send emails.Comment
-
Thanks for all your response.greatly appreciatedComment
Comment