Sub Black Front 10

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cscce
    Trusted Tech

    Site Contributor
    100+ Posts
    • Jun 2014
    • 156
    #1

    [CQ] Sub Black Front 10

    My company was recently given a Sharp MX-C401. All drums are new OEM. The ITB was damaged (lots of bumps along one edge) so it was rebuilt.
    The machine fails sim 50-22 every time. Error is usually "sub black front 10". I have also seen one or two "sub black front 51" and one error referring to main. Also have had "main cyan front 61".
    Registration sensors have been checked and cleaned.

    Any ideas? Black drum? New ITB?
    This is the only Sharp copier I service so I'm no expert on them.

    Thanks in advance!
    Tags: None
    • copiertec
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jan 2016
      • 2188
      #2
      Re: Sub Black Front 10

      [ATTACH]37273 You will need the service manual to follow the procedure. There are adjustment procedure you will have to follow in order to correct the issue.
      Attached Files

        Comment

        • cscce
          Trusted Tech

          Site Contributor
          100+ Posts
          • Jun 2014
          • 156
          #3
          Re: Sub Black Front 10

          Originally posted by copiertec
          [ATTACH]37273 You will need the service manual to follow the procedure. There are adjustment procedure you will have to follow in order to correct the issue.
          Thanks. I have the manual and I'll implement this procedure sometime this week.

            Comment

            Previous template Next
            Working...