SHARP AR1641CS Blank Copies

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • soutec
    Technician
    • Oct 2008
    • 13

    #1

    SHARP AR1641CS Blank Copies

    I have a Sharp AR1641CS with blank copies. I checked the
    transfer wire for shorts no problem. Also ran copy mid-cycle and have no image or toner on the the drum. Any ideas?
    Thanks
  • tmaged
    Owner/Service Manager

    Site Contributor
    1,000+ Posts
    • Oct 2008
    • 1867

    #2
    Check via self print 64-1. If blank, mark dv unit to make sure it's turning. If it's turning, unlock the scanner unit & throw the lock away. More than likely one of those two things.
    Hope that helps !
    -Tony
    www.dtios.com
    Become a fan on Facebook

    Comment

    • soutec
      Technician
      • Oct 2008
      • 13

      #3
      Thanks Tony,

      I'll go back Monday morning and give that a try. I
      should have thought of marking the developer to make
      sure that it is turning. My mind has stopped working.

      Thanks Again

      Comment

      Working...