Full Bleed Stripes 3570

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • OperatorError
    Technician
    • Aug 2017
    • 21
    #1

    Full Bleed Stripes 3570

    I peeled one of these bad boys off my customer's fusing unit. They had 2 or three samples but I wasn't able to duplicate it.

    The pattern and variety of colors make no sense to me. Perhaps high voltage board? Anyone seen this?

    Here is a link due to my uploads failing on here

    fullbleed — imgbb.com
    Tags: board, high, make, variety, voltage
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22696
      #2
      Re: Full Bleed Stripes 3570

      I see this sort of image on Kyoceras regularly. Usually it's caused by a developing unit shorting the developer bias, and shutting down the HVT intermittently. It can be any developing unit, and usually damages the drum of the same color. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...