MX-6070V with MX-TR19 jams

[boutn]

MX-6070V with MX-TR19 jams with these codes: POD3_N POD4_SA

we had these problems a while ago with the same model, also with MX-TR19

Any ideas on where this is coming from?

Im thinking the "gate" (not the reversing gate, the one in the TR19) doestn function as it is supposed to...but i cant find anything wrong with it.

Also, with the previous machine, TR19 was switched, delivery unit was switched, ... we ended up placing a whole new machine (mx5070) and that fixed the problem

[Jamiesdad2]

Re: MX-6070V with MX-TR19 jams

Does the machine have the latest firmware? There is an update for the POD-3_N in 1 of the firmware revisions.

[boutn]

Re: MX-6070V with MX-TR19 jams

Does the machine have the latest firmware? There is an update for the POD-3_N in 1 of the firmware revisions.

FW is the latest: ICU_0770Z100_PCU_0760Z100.

[spanky]

Re: MX-6070V with MX-TR19 jams

Did you enable the right side tray in sim 26-1

[boutn]

Re: MX-6070V with MX-TR19 jams

Did you enable the right side tray in sim 26-1

lol

[fireater]

Re: MX-6070V with MX-TR19 jams

the rubber? disc on the solenoid can get sticky and solenoid doesnt fire correctly?