19 results in 0.0260 seconds.
-
Ricoh MP C transport gate issues
As always, i have the gate issue on the transports for the ricoh Color Machines, this transport gate cilinoid is garbage.. my solution is to block... -
C284 FS-534 72-22 Jamming
So I've got this C284 with an FS-534. I've been fighting this for a while now and just yesterday got to see it happen. This 72-22 (The sub tray exit sensor... -
Inverter / Duplex Jam (J069)
Model(s): MP 6503 / MP 7503 / MP 9003
Symptom: Paper would feed down into the duplex unit. The paper would be skewed between the inverter...Last edited by Ricoh-ono; 03-25-2022, 03:10 AM. -
MPC 5503..
Hi out there,
I am having some paper jam issues with a MPC5503. The paper is snagging at the gate just above the fuser unit, its... -
Firmware
Hellow i am copy machine technician and i want to update canon ir 2016 firmware. But i can't gate updatter. Pls how to gate it? I want every one's help... -
Xerox dc 252: Heavyweight 3 crushes at Exit Gate
Problem: Heavyweight 3 paper crushes at 050K52540 Exit Gate claws. There is an dog ears at outbound half of leading edge. I prove Exit Gate with ruler... -
MX-3100N adu gate soliniod location?
I'm having an issue on an MX-3100N when the paper duplexes it jams in the fuser area with a dogear as it tries to go into adu gate on 8x11 but will not... -
Toshiba E-Studio 305se Looking for a part number
I am working on this machine and I do have the parts manual but what I am looking for is the frame that the gate attaches to. I do not see that they have... -
bizhub 808, J32-05 only on duplex
First time I've seen this:
Simplex prints fine. When duplexing the first three first-sides pass fine, but the first second-side snags in... -
Ricoh Aficio MP C2550 J001 Jam code a few days after Fuser Replacement (Genuine part)
Hi everyone!
I've been working on a Ricoh Aficio MP C2550 for a while.
Machine was reporting SC553. After checking thermistors and... -
RC Gate A connection problem
We have an RC Gate A on our client with 100 RICOH machines located on their 3 different location (All connected w/ different VLAN).
In location... -
KM-3552ci K-toner won't go in
It's pretty obvious I guess ... the enduser runs out of K toner. Thinking that they can get a few more prints they remove the toner, reinstall the empty,... -
MX-6070V with MX-TR19 jams
MX-6070V with MX-TR19 jams with these codes: POD3_N POD4_SA
we had these problems a while ago with the same model, also with MX-TR19
... -
Finisher sr 3090 on mp4200: Dog ear whit jam when gate deviate to basculate tray
damn this is the week of the finisher, I must say that rarely have given me problems, but now it is jump out of this.
it does 1 time about every... -
Bizhub c554 fuser gate pickoff finger
Only part listed in the manual is the whole fuser. Just missing the middle pickoff finger on the gate that opens to get jams out. Customer tore it off....
