Sharp MXM 905

[Clone]

[mojorolla]

Re: Sharp MXM 905

I believe the 905 had the dip switches on the MFP board to reset admin password...

[Clone]

Re: Sharp MXM 905

I believe the 905 had the dip switches on the MFP board to reset admin password...

[Prints Charming]

Re: Sharp MXM 905

MXM905 needs admin password reset completed by the admin password reset form, obtained by your local tech specialist.
MXM904 had the switches on the MFP Board to manually reset the admin password.

[Clone]

Re: Sharp MXM 905

MXM905 needs admin password reset completed by the admin password reset form, obtained by your local tech specialist.
MXM904 had the switches on the MFP Board to manually reset the admin password.

Yes. But I think someone can share the file with me.

[Clone]

Re: Sharp MXM 905

I know but i think someone can share the file with me.

[Prints Charming]

Re: Sharp MXM 905

If you cannot obtain the file, backup the address book and network settings only in Device Clone Settings, then perform Private Data Initialize in Security Settings. Once the device is returned to factory, restore the 2 clone files you made earlier.
Your admin password will be restored.
For the time it takes to run the device reset & HDD format, it'll be quicker than waiting for a file that may never come.

[havokprod]

Re: Sharp MXM 905

If you cannot obtain the file, backup the address book and network settings only in Device Clone Settings, then perform Private Data Initialize in Security Settings. Once the device is returned to factory, restore the 2 clone files you made earlier.
Your admin password will be restored.
For the time it takes to run the device reset & HDD format, it'll be quicker than waiting for a file that may never come.

Don't you need the admin password to get to the Private Data Initialize in Security Settings?

[Prints Charming]

Re: Sharp MXM 905

Don't you need the admin password to get to the Private Data Initialize in Security Settings?

Ah yes. Ignore this idiot who was clearly not thinking!
Forget what I said.

Format the HDD in 62-01. That should work too.

[havokprod]

Re: Sharp MXM 905

Ah yes. Ignore this idiot who was clearly not thinking!
Forget what I said.

Format the HDD in 62-01. That should work too.

I did not know that thanks for the tip.

[Clone]

Re: Sharp MXM 905

If i format HDD,I would have a error u2-60 ?

[Prints Charming]

Re: Sharp MXM 905

On older models, normally yes. However on the MXM905 the Watermark and OCR is stored on the mSata not the HDD.
See Page 423 of the Service Manual.