[Dead] MX2310u

[Freedom1986]

Hi guys,


Please if anyone has the firmware for MX-2310U.
I have a message on the screen:
Version Check
IcuB: 0103G10a


Thank you

[jp74msj55]

Re: MX2310u

Hi guys,


Please if anyone has the firmware for MX-2310U.
I have a message on the screen:
Version Check
IcuB: 0103G10a


Thank you

Here you go

[Freedom1986]

Re: MX2310u

Here you go

Thanks *g*. Am a service menu, there it shows me only the FW. But can not start it, alternatively it lets me install a new FW via usb. Hence my question about a FRw

[grek]

Re: MX2310u

Hello everyone

I have exactly the same problem.

Could someone also send me the firmware for MX-2310U


Thank You
helloI have exactly the same problem .Could someone also send me the firmware for MX-2310Uthank you

[lky1978]

Re: MX2310u

Hello everyone

I have exactly the same problem.

Could someone also send me the firmware for MX-2310U


Thank You
helloI have exactly the same problem .Could someone also send me the firmware for MX-2310Uthank you

replace the sd card from sharp

[grek]

Re: MX2310u

replace the sd card from sharp

Hello ,

Thank you very much for the reply.

I misspoke
I think my problem is a bit different.
i made a manipulation error as admin wihch cause the machine try to update its firmware.

In order to solve my problem, i would need the firmware for the Mx 2310 U.


thank You

[rimba]

Re: MX2310u

Please if anyone has the firmware for MX-2310U.

my email: euyulio.org@gmail.com

thank you in advance!