Sharp MX-8081

[Oso]

Greetings all, this Sharp MX-8081 is throwing TRAY1_1ST jam code. Feed and sep rollers are new and tandem transport assembly is also new. Anyone have an idea where I should look next?
Thanks in advance

[ZOOTECH]

Try SIM 7 to eliminate jam codes; if it still jams, you have a mechanical issue, if it passes paper, you have an electrical (sensor) trouble.

[ihatefinishers13]

Greetings all, this Sharp MX-8081 is throwing TRAY1_1ST jam code. Feed and sep rollers are new and tandem transport assembly is also new. Anyone have an idea where I should look next?
Thanks in advance

A little more info please? How many copies on the machine? How many on just tray 1? Firmware up to date? (Sometimes a CN Update can do wonders) Is this the only jam code, and no error codes otherwise?

[miller01123@gmail.com]

I sure you checked for folded corners in the stack of paper. Could be the clutch responsible for picking up the paper from the tray (Tandem drive unit).

[Oso]

Thanks all for the helpful suggestions. Turns out it was the simplest of things and my colleague caught it, Hadn't seated a feed roller all the way... Hanging head in shame. lol

[Craigcul]

Hi there, at least you came back and let us know what the fault was. That is why I always, when possible, take a torch and check that the feed rollers are seated all the way. You should also feel a click when the roller is in all the way

[ihatefinishers13]

Hi there, at least you came back and let us know what the fault was. That is why I always, when possible, take a torch and check that the feed rollers are seated all the way. You should also feel a click when the roller is in all the way

I always do a little shim-shimmy back and forth for that reason, on ANY roller, or almost anything I put back in place. Same thing in the older version of the DSPF with that plastic pickup roller holder.

[bigdaddyooo]

Dont forget the paper being folded under itself in the tray. VERY common with this design