disable fax

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • boutn
    Senior Tech

    500+ Posts
    • Jun 2016
    • 540

    #1

    disable fax

    Hello,

    Is it possible to disable Fax on the MXC304W?

    Like completely disable it, not only delete the shortcut on the homepage
  • onetek
    Trusted Tech

    250+ Posts
    • Apr 2009
    • 318

    #2
    Re: disable fax

    Remove back cover , disconnect fax , done.

    Comment

    • mansart
      Senior Tech

      Site Contributor
      500+ Posts
      • Apr 2009
      • 852

      #3
      Re: disable fax

      I'm not a betting man, but if I were, I would bet on the horse named "Error Code"

      I would assume that just unplugging fax board would result in some type of code.

      F6-00 most likely.
      Last edited by mansart; 05-17-2022, 07:12 PM.

      Comment

      • boutn
        Senior Tech

        500+ Posts
        • Jun 2016
        • 540

        #4
        Re: disable fax

        Originally posted by mansart
        I'm not a betting man, but if I were, I would bet on the horse named "Error Code"

        I would assume that just unplugging fax board would result in some type of code.

        F6-00 most likely.

        Comment

        • mansart
          Senior Tech

          Site Contributor
          500+ Posts
          • Apr 2009
          • 852

          #5
          Re: disable fax

          I tried this on a MXM455 after seeing your post. Initially looks like it will work but after about 10 minutes will throw F6-00


          Sent from my iPhone using Tapatalk

          Comment

          • boutn
            Senior Tech

            500+ Posts
            • Jun 2016
            • 540

            #6
            Re: disable fax

            yep, F6-00 it is

            Comment

            • bilyahn
              Service Manager

              1,000+ Posts
              • Dec 2006
              • 1470

              #7
              Re: disable fax

              You should be able to disable the fax in system settings/device settings or is this a lexmark/sharp

              Good luck

              Bil

              Comment

              • onetek
                Trusted Tech

                250+ Posts
                • Apr 2009
                • 318

                #8
                Re: disable fax

                My bad, the copier in our shop with a disconnected fax board is a MX-C407F. No F6-00 on this one, just error 900 popping after sometime. We disconnected the fax to make sure error 900 was not from fax board.... Fax disabled in settings too.
                Last edited by onetek; 05-18-2022, 02:40 PM. Reason: add info

                Comment

                Working...