Mx-3050n randomly does not reach the requested number of copy

[ageraldo]

Hello everyone,
I have a problem with the SHARP MX-3050N copier.
When I want to make a photocopy of 100 pages for example; the copier can randomly make a certain number of copies below 100 pages and the copying stops. Without the copier reporting a jam. When I want to cancel the copy, the machine says "please wait" and the control panel stops responding.
Please Help!

[ihatefinishers13]

Re: Mx-3050n randomly does not reach the requested number of copy

My first thought is something with the hard drive, and then maybe the mSata. The hard drive typically does some weird things when it starts to fail, and I wouldn't put it passed it to do something like it.

Are you a tech, or just an end user?

[ageraldo]

Re: Mx-3050n randomly does not reach the requested number of copy

I am a tech

[driving lots of miles]

Re: Mx-3050n randomly does not reach the requested number of copy

My first thought is something with the hard drive, and then maybe the mSata. The hard drive typically does some weird things when it starts to fail, and I wouldn't put it passed it to do something like it.

Are you a tech, or just an end user?

I would agree with the Hard drive or the M-Sata as the place to start.

[Hart]

Re: Mx-3050n randomly does not reach the requested number of copy

No jam are recorded in 22-3 ? I don't remember which code was popping when the hard drive was failing while printing.

[Sven94]

Re: Mx-3050n randomly does not reach the requested number of copy

No jam are recorded in 22-3 ? I don't remember which code was popping when the hard drive was failing while printing.

In our many cases it was PRI_JAM, P_ON

[tedtech]

Re: Mx-3050n randomly does not reach the requested number of copy

In our many cases it was PRI_JAM, P_ON

Yep that's a hdd