BP-60C31

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Massimo
    Technician
    • Feb 2023
    • 19

    #1

    BP-60C31

  • Larhal
    Semi Retired

    Site Contributor
    VIP Subscriber
    500+ Posts
    • May 2013
    • 532

    #2
    Re: BP-60C31

    Are the toners original Sharp?
    Larhal

    Retired Part Time

    If all else fails read the Service Manual!

    If that fails, meet me at the pub and we will discuss it.

    Comment

    • Massimo
      Technician
      • Feb 2023
      • 19

      #3
      Re: BP-60C31

      Si , originale

      Comment

      • OlliK1969
        Trusted Tech

        250+ Posts
        • Nov 2016
        • 309

        #4
        Re: BP-60C31

        Hi
        All transport locks removed? All units (drums + developer) removed and reinstalled?
        Which firmware version was originally on it? From version 03.20. There is an installation wizard that MUST be used to assign a new password.

        Comment

        • boutn
          Senior Tech

          500+ Posts
          • Jun 2016
          • 537

          #5
          Re: BP-60C31

          I had a brand new BP-70C55 with a connector on the PCU PWB that wasnt connected properly (bent pin)

          Hopper yellow wasnt working correctly.

          Maybe check those connectors?

          Comment

          • Massimo
            Technician
            • Feb 2023
            • 19

            #6
            Re: BP-60C31

            Ho risolto era la pwb. MFPC

            Comment

            Working...