ARM-160 / ARM-205 Fuser Part Numbers (240v version)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Emjay
    Technician
    • Jul 2009
    • 42
    #1

    ARM-160 / ARM-205 Fuser Part Numbers (240v version)

    Hello folks,

    Can anyone give me the part number for the fusers used in these two machines (complete assembly) ?

    I'm after the 240 / 220V version, not the US model.

    The parts guide on the Sharp tech support site is corrupt, and is missing the pages that cover the fuser assembly.

    I've got conflicting part numbers and info at present (and also a wrongly ordered fuser to deal with).

    The part number DUNTW0327US21 is one I've ordered, but it definately doesn't fit the ARM-160 as the thermistor connector is different.

    Any UK / EU Sharp experts out there got any info they care to share (or a working copy of the Parts Guide would be fine).

    Many thanks,

    MJ
    Tags: 240v, arm-160, arm-205, arm160, arm205, email address, fuser, fuser unit, number, numbers, part, version
    • OMD-227
      #2
      The 230/240V Fuser Unit (complete part) is DUNTW0327RS12.

      I have the parts manual is you need it. Give me your email address.

        Comment

        • Emjay
          Technician
          • Jul 2009
          • 42
          #3
          Thanks for the info - much appreciated.

          If I enter DUNTW0327RS12 into the Sharp spares site, it tells me that its been superceeded by DUNTW0327US21 - which is the fuser I was sent.

          So - thanks again, it seems I do have the correct fuser after all.

            Comment

            • OMD-227
              #4
              Yes, you are correct. A more thorough look by myself shows that the fuser was upgraded to support the new machines such as AR5316, AR5320 & AR5220 as well as the usual 160 & 205 machines.

              Sending you the parts manual as requested.

                Comment

                Previous template Next
                Working...