L4-02 on ARM 455

[DanielNM]

We have already ordered the Main Drive Unit. Should be in Today. I have also heard it's a pain. About 2 hours or so to change it. I'll let you know how it goes. Thanks! Daniel

Thanks! I used to live in Michigan back in the 70's. We replaced the MDU last week and it's doing great. It took us about an hour or so and all went well. Appreciate your input! Daniel

[bilyahn]

One other place to look is at the registration assembly. Had a unit with 30K start getting this code and the bushings for the registration roller were gummed up and it's operation was very stiff. Might be helpful in the future as I have had all of the previously mentioned problems as well.

Good luck and happy Holidays.

Bil

[DanielNM]

One other place to look is at the registration assembly. Had a unit with 30K start getting this code and the bushings for the registration roller were gummed up and it's operation was very stiff. Might be helpful in the future as I have had all of the previously mentioned problems as well.

Good luck and happy Holidays.

Bil

Cool! Thanks Bill for the heads up! Daniel