MX-FN11 Finisher

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Djenks
    Technician
    • Mar 2010
    • 13
    #1

    MX-FN11 Finisher

    With the 4K Sheet Finisher, can you choose which tray to print to? I was under the assumption that you could. Lower tray was for offset and top tray for straight prints. Not to familiar with the 4K Finisher.
    Tags: admin, connected, customer, driver, familiar, finisher, key, lower, nec, offset, output, print, printer, printing, printing preferences, prints, set, settings, sheet, sys, system, system settings, top, tray
    • bilyahn
      Service Manager

      1,000+ Posts
      • Dec 2006
      • 1455
      #2
      Should be able to set up the output tray in system settings, key op (admin) settings, printer settings. What machine do you have it connected to?

        Comment

        • Djenks
          Technician
          • Mar 2010
          • 13
          #3
          The Finisher would be connected to a MX-453. Essentially the customer wants 1 group of people to print to the top tray and the other group to the bottom as to avoid confusion on print jobs.

            Comment

            • ZOOTECH
              Senior member of CRS

              Site Contributor
              2,500+ Posts
              • Jul 2007
              • 3381
              #4
              Originally posted by Djenks
              The Finisher would be connected to a MX-453. Essentially the customer wants 1 group of people to print to the top tray and the other group to the bottom as to avoid confusion on print jobs.
              Set up "Printing Preferences" in the driver at each PC to output to tray they want.
              "You can't trust your eyes, if your mind is out of focus" --

                Comment

                • Djenks
                  Technician
                  • Mar 2010
                  • 13
                  #5
                  Originally posted by ZOOTECH
                  Set up "Printing Preferences" in the driver at each PC to output to tray they want.
                  Awesome, that is what i was planning to do!

                    Comment

                    Previous template Next
                    Working...