Sagem mf-9327 toner chip

[efe311]

yes i flash it with sharp firmware & its work very good

[DINGO]

Many thnx i try that & it's work thnx again

Hi
trhe sagem after change the firmware by sharp, work whith the two toner chips, sagem and sharp.

regards

[efe311]

Hi

I have several sagem 9323 , i flash it whith firmware sharp ar-m236 and after acepts very good the toner, and chipr toner sharp.

good look

Many thnx i try that & it's work thnx again

[efe311]

Many thnx i try that & it's work thnx again

Its all good mate..... just stirring the pot.

I'll be leaving the re-flashing of brands to you. You seem to be the master of it.

[DINGO]

I have several sagem 9323 , i flash it whith firmware sharp ar-m236 and after acepts very good the toner, and chipr toner sharp.

good look

Precisely why you have so many problems with weird trouble codes Dingo! Remember your U1-01 issue!

[DINGO]

Hi

I have several sagem 9323 , i flash it whith firmware sharp ar-m236 and after acepts very good the toner, and chipr toner sharp.

good look

[efe311]

I HAVE THE DEVICE THAT CAN CHARGE THE TONER CHIP FOR SHARP COPIERS BUT THAT DEVICE CAN NOT READ OR WRITE ON THE TONER CHIP FOR SAGEM COPIERS
NOTE :
THE SAGEM COPIER MF-9327 THE SAME OF SHARP AR-M276
WHAT CAN I DO FOR THIS PROBLEM