ARM455N ROM update NG FPDL-52 error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bilyahn
    Service Manager

    1,000+ Posts
    • Dec 2006
    • 1470

    #16
    Got it, thank you again!

    Comment

    • bilyahn
      Service Manager

      1,000+ Posts
      • Dec 2006
      • 1470

      #17
      Okay the non-elem sfu file worked perfect. Thank you very much for the info and the file wazza.

      Everyone have a wonderful weekend.

      Bil

      Comment

      • OMD-227

        #18
        Nice one!

        Remember that one, because you will see it again. Many machines have different rom types, and require the correct firmware version type.

        Comment

        • bilyahn
          Service Manager

          1,000+ Posts
          • Dec 2006
          • 1470

          #19
          Originally posted by wazza
          Nice one!

          Remember that one, because you will see it again. Many machines have different rom types, and require the correct firmware version type.
          I will have to do some searching on the Sharp IDNC site. No matter what I tried I still got the same firmware edition. No other options. I'll have to check on Sharpnet to see if there is something different.

          Comment

          • OMD-227

            #20
            On the Australian site, if you download the firmware for that particular machine, it will extract out into 2 folders..... one ELEM and one NON-ELEM. You then obviously use the one for your particular flashrom type on that machine. Too easy!

            If you ever get stuck like that again, let me know. Happy to send you whatever firmware you need mate.

            Comment

            • bilyahn
              Service Manager

              1,000+ Posts
              • Dec 2006
              • 1470

              #21
              Thank you. I wish our site was like that. Sometimes I wonder about SharpUSA and this new website that they have.

              Comment

              Working...