Sharp AR-C160 digital colour.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cliffhangers
    Trusted Tech
    • Feb 2010
    • 242
    #1

    Sharp AR-C160 digital colour.

    Hi.this sharp AR-C160 is displaying error code H4-00 please kindly help.Thanks in advance.
    Tags: advance, amou, c160, code, colour, digital, displaying, error, error code, help, interrupt, lef, sharp, tempature
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22744
      #2
      Man, you are going to hate this machine.

      I just have one question for you. Do they run large amounts of cardstock? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9919
          #3
          This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


          Paul@justmanuals.com

            Comment

            • OMD-227
              #4
              Originally posted by blackcat4866
              Man, you are going to hate this machine.
              Agreed.
              Got 2 left in the field...... Am counting the days until they're gone. Unfortunately I gotta look after them (I'm the only one will balls big enough to walk in the front door).

                Comment

                • Scijohn23
                  Technician

                  50+ Posts
                  • Sep 2009
                  • 91
                  #5
                  H4-00 is a fuser problem, has to do with the heat roller, you can reset in simulation mode 14, access simulation vi program interrupt clear interupt. Might try raising the fuser roller tempature as well.

                    Comment

                    • SwampYankee
                      Technician
                      • Jul 2010
                      • 20
                      #6
                      My advice would be to arrange for it to have an unfortunate, but fatal, accident. But the above post is a good backup plan.

                        Comment

                        Previous template Next
                        Working...