ARM 620n farmware needed

It will not work unless you put in the P19 option kit. It needs the hardware and a product key to unlock the print option.

Bingo!

[ZOOTECH]

It will not work unless you put in the P19 option kit. It needs the hardware and a product key to unlock the print option.

Main and Boot ROMs will have p4.06 on the chips if it is an upgraded 'U' model; sorry, don't have pictures.

Thanks ZOOTECH and wazza

But what about those Pictures






Guys , Do think if I take a main flash rom with firmware ( n4. 04 ) and put it instead the one with ( u4. 04 ) firmware in ARM620u. ( it will work or not ??? )

Are those pictures of you machine? You are clearly missing everything that is needed.

You see the removeable plate near the Parallel port connector. That gets removed and the network card in the ARP19 kit is installled there.

If those pictures are from your machine, you do not have the ARP19 kit fitted. Also, simply check sim 22-10 for the machine configuration list. It will tell you all the options fitted to the machine.

[ZOOTECH]

Main and Boot ROMs will have p4.06 on the chips if it is an upgraded 'U' model; sorry, don't have pictures.

ARP19 Kit What is it ???

thanks guys for your helping

those are some pix to make sure about the ARP19 ( is it or not )


some friends have the same copier ARM620u they are the same in every thing but when we print the customize setting the main firmware for theirs ( Vn 4.04 )
and the copier I have its main firmware is ( Vu 4.04 ) their copiers work as "N" but main works as "U"





Why

I think because of the "Main" firmware

I don't really know what's the ARP19 Kit exactly

I'm sure I have the ARP19 Kit but i think I need the firmware for "N"

I hope If any one can bring me the pix for the ARP19 Kit.

Thanks All ..

Lunch is eaten in the car, while travelling to the next call. I have a unique skill of turning corners with my knees .

[bonnie750]

You take lunch!!!!!!!!!!!!??????????????

What kind of outfit do you work for mate?????

Our call controllers take lunch, but there's always one to take over and throw another 2 hour response call behind you.

Bill

Ouch.


Yep, its 12.30pm monday here. Off to grab some lunch.

Down under.... the best side of the world!

[blackcat4866]

That, and all the toilets swirling clockwise ...

[tmaged]

In Australia it's already tomorrow. I boggles the mind ... =^..^=

Not to mention the fact that it's spring. No wonder he's so "off". he he he

[blackcat4866]

In Australia it's already tomorrow. It boggles the mind ... =^..^=

[tmaged]

even though it is quite amusing for a monday morning.

Dude, it's Sunday !!!

Mate, you are having the piss taken.

I cant let this keep going..... Its not fair at all... even though it is quite amusing for a monday morning. There is no such thing as a farmville app on facebook to obtain firmware for you copier (even though that would be a cool way of doing business.... Paul is a funny bastard!).

The answer you need has already been posted. You need to purchase the ARP19 kit from Sharp and follow the instructions inside. This will turn your machine into a networked ARM620.


Firmware = internal software/programs for controlling electronic devices.
Farmware = equipment commonly used by a farmer.

You can get the farmware on Facebook, you have to use the farmville app.

Thanks for your help , can you tell me please how can I get the firmware on Facebook, you have to use the farmville app.

You seems to have alot of information about fi(a)rmwares

I think we came to this forum to share our Experiencesand to help each other Right??

I Really hope to help my Friend